Tl494 Circuit Diagram Portable Jun 2026

The TL494 IC has a 16-pin package with several pinouts that need to be connected to external components to form a functional circuit. The pinout configuration of the TL494 is as follows:

These act as the "brain," constantly comparing output levels to a reference to ensure stable voltage or current. Dead-Time Control (DTC): tl494 circuit diagram

| Pin | Name | Description | |-----|--------------|-------------| | 1 | 1IN+ | Non‑inverting input of error amp 1 | | 2 | 1IN‑ | Inverting input of error amp 1 | | 3 | FEEDBACK | PWM comparator input (usually from error amp output) | | 4 | DTC | Dead‑time control (0V to 3V, higher = more dead time) | | 5 | CT | Timing capacitor (to GND) | | 6 | RT | Timing resistor (to GND) | | 7 | GND | Ground | | 8 | C1 | Collector of output transistor 1 | | 9 | E1 | Emitter of output transistor 1 | | 10 | E2 | Emitter of output transistor 2 | | 11 | C2 | Collector of output transistor 2 | | 12 | VCC | Supply voltage (7V to 40V) | | 13 | OUTPUT CTRL | Output mode control: to GND = parallel mode; to REF = push‑pull mode | | 14 | REF | 5V reference output (max 10 mA) | | 15 | 2IN‑ | Inverting input of error amp 2 | | 16 | 2IN+ | Non‑inverting input of error amp 2 | The TL494 IC has a 16-pin package with

| Pin No. | Name | Function | |---------|------|----------| | 1 | 1IN+ | Non-inverting input of Error Amplifier 1 | | 2 | 1IN- | Inverting input of Error Amplifier 1 | | 3 | FEEDBACK | PWM comparator input (usually for output voltage control) | | 4 | DTC | Dead-Time Control (sets minimum off-time) | | 5 | CT | Timing Capacitor (sets oscillator frequency) | | 6 | RT | Timing Resistor (sets oscillator frequency) | | 7 | GND | Ground | | 8 | C1 | Collector of Output Transistor 1 | | 9 | E1 | Emitter of Output Transistor 1 | | 10 | E2 | Emitter of Output Transistor 2 | | 11 | C2 | Collector of Output Transistor 2 | | 12 | VCC | Positive supply voltage (7V to 40V) | | 13 | OUT CTRL | Output control (High = Push-Pull mode, Low = Single-ended) | | 14 | REF | 5V Precision Reference Output | | 15 | 2IN- | Inverting input of Error Amplifier 2 | | 16 | 2IN+ | Non-inverting input of Error Amplifier 2 | | Name | Function | |---------|------|----------| | 1

A typical TL494 circuit diagram is a masterclass in elegant design, featuring several critical internal blocks: On-Chip Oscillator:

: This pin is used to close the control loop by taking a sample of the output and feeding it back to adjust the duty cycle dynamically. Applications and Alternatives