Toy Taxi Claw Machine Manual !!better!! Now
Adjusting the claw's "grab" and "hold" strength is the most common operator task. Most models use a two-step voltage system :
Ensure the claw string is not frayed. A snapped string can cause the gantry to jam.
: Press the "Catch" button on the joystick to drop the claw.
Gantry Rails: Periodically clean and lightly lubricate the X and Y axis rails.
The Toy Taxi uses a "three-wire" claw motor. If you hear the motor spinning but the claw doesn’t close, refer to the manual’s wiring color code: Red (power), Black (ground), Yellow (signal).
Adjusting the claw's "grab" and "hold" strength is the most common operator task. Most models use a two-step voltage system :
Ensure the claw string is not frayed. A snapped string can cause the gantry to jam.
: Press the "Catch" button on the joystick to drop the claw.
Gantry Rails: Periodically clean and lightly lubricate the X and Y axis rails.
The Toy Taxi uses a "three-wire" claw motor. If you hear the motor spinning but the claw doesn’t close, refer to the manual’s wiring color code: Red (power), Black (ground), Yellow (signal).
