If your model has a tension cable, connect the upper tension wire from the console area to the lower cable coming from the resistance mechanism.
Now that the frame is aligned, go back and tighten every bolt with your wrenches. dp dual trac 20 assembly instructions full
Bring the cable back up to the weight carriage or resistance stack. If your model has a tension cable, connect
: Users on platforms like Facebook Marketplace often share photos of original printed manuals when selling the unit. : Users on platforms like Facebook Marketplace often
Once the horizontal track is secured, the focus shifts to the installation of the carriage and the vertical arm. The carriage unit, which houses the bearing system, must be carefully slid onto the horizontal track from one end. Users should take care not to force the carriage; if it resists, the set screws on the bearings may require a slight adjustment to looseness before sliding into place. Once the carriage is mounted on the horizontal track, the vertical arm (or column) is typically attached to the carriage or, in some variations, is an integral part of the unit. This vertical arm allows the drawing head to move up and down. It is essential to check that the vertical arm is plumb (perfectly vertical) relative to the horizontal track. Some models feature a tension wire within the vertical arm; this wire must be checked for proper tension to ensure smooth vertical tracking without sagging.
: 16 individual cement-filled weight plates (approx. 11 lbs each) providing up to 210 lbs of resistance.
