Use a soldering iron to heat the connections for the old potentiometer. It is often easier to cut the legs
: Check the 9-pin connector at the subwoofer end. Bent pins are a common cause of failure and can often be carefully straightened with tweezers. Do you have a soldering iron available, or are you looking for a pre-built replacement pod instead? creative gigaworks t3 volume control replacement work
Verify operation
The scent of heated rosin filled the air as Elias fired up his soldering station to 350°C. He applied a bead of fresh solder to the old joints to improve heat flow, then used a desoldering pump to suck away the grey liquid metal. One by one, the pins clicked free. Use a soldering iron to heat the connections
If you're experiencing any of these issues, it's likely that the volume control needs to be replaced. Do you have a soldering iron available, or